Used Lapidary Equipment and Jewelry Tools

On occasion we offer good condition used lapidary equipment and jewelry tools. Contact us before ordering outside of the US. Enjoy Shopping!
Page 1 of 2: « First « Previous 1 2 Next » Last »

ANTIQUE CAST IRON TIRE TUBE VULCANIZER

This is a good condition ANTIQUE CAST IRON TIRE TUBE VULCANIZER made in the USA. It’s marked “SHALER 5-MINUTE VULCANIZER”. Measurements are 2 1/2″ TALL AND 4 1/2″ LONG. Even though it’s a clamp or press for vulcanizing, it was used by a jeweler for holding parts for gluing, tooling, etc. Shipping and handling $7.

$15.00Price:
Loading Updating cart...

ASSORTED JEWELER'S TOOLS

These are ASSORTED JEWELER’S TOOLS including:
1) A 1.5mm “14K” bent shank stamp.
2) An Evers size 00 “925″ straight shank stamp.
3) A 1/24 “14K bent shank stamp.
4) Two stainless tweezers-curved.
5) One precision pattern stainless tweezers.
Shipping and handling $7

$20.00Price:
Loading Updating cart...

ASSORTED UNUSUAL TOOLS

These are ASSORTED UNUSUAL TOOLS including:
1) A Pearl and Bead Drilling Vise which holds securely for precision work. It enables precision drilling, inspecting and cleaning. The knurled lock nuts provide quick clamping and release action. 13 hole sizes 0.7-6.5mm.
2) A vintage Spark Plug and Distributor Gauge and Wrench.
3) A neat Brass Mystery Pressurized Canister of unknown use and origin. The contents smelled like ether or some type of hydrocarbon.
Measurements are 1.5×5.5 inches.
Shipping and handling $7.

$20.00Price:
Loading Updating cart...

Duel 12 lb Barrel Heavy Duty Lapidary Rock Tumbler

This is a DIY Duel 12 lb Barrel Heavy Duty Lapidary Rock Tumbler featuring two Lortone QT-12 ten sided moulded rubber barrels, a heavy duty belt drive system, and 1/2 inch steel shafts with bronze pillow block bearings. It can be used to polish rocks, brass, castings, beads, glass, and more. The frame is heavy gage but lightweight angle iron. The Dayton drive motor is 1/3 hp, 115V, and 1725rpm. The large pulley is 10 inches in diameter and the barrels rotate at 24 rpm. Overall dimensions are 26x20x15 inches. Weight 42 pounds. This is a commercial grade machine and not for children. Ships in two separate boxes so the motor and pulley will need to be re-assembled. Assembly instructions are well marked. Shipping and Handling- $70 (US only).

$300.00Price:
Loading Updating cart...

HARDENED ROUND TOOL STEEL DRAWPLATE

This is a HARDENED ROUND TOOL STEEL DRAWPLATE by Louvet (France) for reducing the size of or cold hardening gold, silver, etc. wire. Also hardens wire for making O-Rings. Holes are progressively smaller so that wire drawn from the preceding hole will easily go through the next hole. Occasional annealing may be required. Bees wax facilitates drawing. Plate measurements are 1 1/8×3.5×3/16 inches. There are 20 holes from 1mm down to 0.5mm (appx.). Shipping and handling $7.

$20.00Price:
Loading Updating cart...

Hi-Tech Diamond 6 Inch Lapidary Trim Saw

This Hi-Tech Diamond 6 Inch Lapidary Trim Saw is an almost new. It’s an American made 6 inch trim saw in excellent condition. It’s for cutting and trimming rock slabs, cutting out scribed cabochon preforms from slabs, trimming crystals, specimens and faceting rough, cutting and trimming glass and more. It’s lightweight, rustproof, impact resistant, and portable. Cutting speed is variable from 800 to 3400 rpm. The coolant reservoir holds 16 ounces and can be easily cleaned. Motor is 1/4 hp with ball bearings and a 5/8 inch arbor shaft. One new and one used 6 inch diamond saw blade is included. Shipping and handling -$40.(US only).

$300.00Price:
Loading Updating cart...

Hi-Tech Diamond 8" Lapidary Grinding and Polishing Lap Machine

This is a lightly used Hi-Tech Diamond 8″All-U-Need lapidary grinding and polishing machine. It is a flat lap machine that grinds, shapes, and polishes rocks, glass, or minerals. It used to make cabochons or specimens for jewelry, displays, and more. It’s rust proof, impact resistant, and portable. The ball bearing motor is 1/4 hp with variable speed between 800 and 3400 rpm. The water lubricating system is simply a top water cup that drips onto the work surface and then drains into another cup below. Included is two sets (one 6 discs and one 4 discs) of accessory grinding and polishing laps with a variety of grit sizes from rough grind to final polish. Also included is a full set of 12 diamond polishing paste syringes from 0.5 to 40 microns and an operating manual. Shipping and Handling $40 (US only).

$300.00Price:
Loading Updating cart...

Lapidary Grinding and Polishing Cabbing Machine (sold 6/15/19)

This Lapidary Grinding and Polishing Cabbing Machine is essentially unused. It’s a 6 inch cabochon making machine fabricated in the USA for Kingsley North Lapidary Supply. The six diamond grinding and polishing wheels are in excellent condition. They include 80, 220, 280, 600, 1200, and 14000 grit sizes with REZ bonded diamonds. The body is stainless steel with 3/4 inch stainless shafts and ball bearings. It has a simple drip water system with flow control valves for each wheel. The motor is a heavy duty Dayton 1/3 HP, 120V, and 1725 rpm speed. The whole unit weighs 66 pounds and measures 17x26x9 inches. This machine sells for about $1300 new. It will ship in two boxes and minor reassembly will be required for the motor and belt guard. Shipping and handling is $70 (US only).

$800.00Price:
Loading Updating cart...

LAPIDARY ROCK HAMMER AND JUDD SPEED CLAMP

This is a good condition LAPIDARY ROCK HAMMER AND JUDD SPEED CLAMP. The rock hammer (Model A12B) is by True Temper and measures 11.5×7.75 inches. It weighs 1.75 pounds. The 6 inch speed clamp was made by Judd in the 40′s and it still works well. It measures 9.5×5 inches. Shipping and handling- $14 (US only).

$25.00Price:
Loading Updating cart...

LAPIDARY TUMBLER BARREL

This is a new condition LAPIDARY TUMBLER BARREL. If you are irritated by tumbler barrell issues, this is for you! The barrel dimensions are 7.5″Dx5″H and it weighs 6 pounds (also holds 6 lbs. of rocks). Walls are 1/2 inch thick soft nitrile rubber with 10 internal flat sides for enhanced tumbling. End plates are rigid 5/16 inch thick aluminum. A 3/4 inch diameter stainless steel center post with a 3/8 inch threaded end is used for compression lid tightening using a stainless steel attachment nut. This will not leak and is extremely durable. It was used by an R&D facility and is an order-of-magnitude better quality than normal tumbler barrels. Shipping and handling is- $15 (US only).

$45.00Price:
Loading Updating cart...

LARGE BRASS PANTOGRAPH FONT SET

This is a LARGE BRASS PANTOGRAPH FONT SET:
1) 54 total characters
2) 4.5 inches high, 1/16 inches thick
3) All letters A-Z
4) All numbers 1-10
5) 15 miscellaneous characters “, +, &,:,;,/ etc.
6) Weight 17 pounds.
Shipping and handling $14

$60.00Price:
Loading Updating cart...

Lortone QT-12 Lapidary Rock Tumbler

This Lortone QT-12 Lapidary Rock Tumbler is a 12 pound capacity professional grade tumbler in very good condition. The Lortone QT-12 features a heavy duty 120V motor, a large 10 sided moulded-rubber barrel, stainless drive cover, heavy gage drive belt, and an all steel body. Polishes rocks, brass, castings, beads, jewelry, glass and more. Easy to use even for beginners. Shipping and handling is $40 (US Only). . Weighs 16 pounds.

$140.00Price:
Loading Updating cart...
Page 1 of 2: « First « Previous 1 2 Next » Last »